Tusa ZEN AIR IQ-950 Owner'S Manual Download Page 97

Page: 97 / 137

UPLOADING SETTINGS AND DOWNLOADING DATA

The ZEN AIR is configured with a Data Port that enables it to be connected to a PC USB

port using a special Interface Cable available as a separate option.

A USB Driver is provided as part of the interface system, a separate option.

The Settings Upload portion of the program can be used to set/change Main Time, Date,

Set A group (Alarms), and Set U group (Utilities). The Set F group (FO2) and FREE Mode

Alarms must be entered using the ZEN AIR's button controls.

Information available for retrieval (DownLoad) from the ZEN AIR to the PC Download por-

tion of the program includes dive number, surface interval time, maximum depth, elapsed

dive time, start date, start time, lowest temperature underwater, sampling rate, dive profile,

Set Points, NiBG, O2BG, start/end Pressure, and Gas/TRT Switching events.

The ZEN AIR checks for the presence of an interface device connection to the Data Port

once every second while in Watch Default Time mode. Checks are not made if the Wet

Activation contacts are wet. Upon sensing an interface connection, the requesting device

(PC) connects to the ZEN AIR and is prepared for Upload of settings or Download of data

which are then initiated using the PC program.

Prior to attempting to Download data from your ZEN AIR or Upload Settings to it, review

the Help section of the interface program. Recommended is to print those sections of Help

that you consider appropriate for your Interface activities.

Summary of Contents for ZEN AIR IQ-950










































































































































Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands

Tusa ZEN AIR IQ-950, Owner'S Manual

Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands