It is imperative that you maintain the cables properly adjustment to en-
sure a safe and smooth operation.
BRT-1 CABLE ADJUSTMENT DIAGRAM
Minor Cable Adjustment
1. Loosen the hardware that holds the Nylon
Pulley (#64-Labeled D) to the
Main Frame’s
(#5)
pulley bracket.
2. Thread in or out the Nylon Insert Lock (#74)
to give the cable proper tension.
3. Re-tighten the hardware that holds the Nylon
Pulley (#64-Labeled D) to the
Main Frame’s
(#5)
pulley bracket to complete the cable
adjustment.
Major Cable Adjustment
1. Remove the hardware from the Nylon Pulley
(#64-Labeled F).
2. By interchanging the Nylon Pulley (#64-
Labeled F) to the next adjustment hole within
the
Closed-end Adj. Double Pulley
Bracket (#33)
it will make one inch cable ad-
justment.
3.
Re-tighten the hardware for the Nylon Pulley
(#64-Labeled F) to complete the cable ad-
justment.
Cables should be inspected and adjusted periodically to avoid any
slack in the cables which would, consequently, prevent any dam-
age to the equipment or personal injury.
CAUTION
Fully Fasten
: Proceed to Fully Fasten these
hardware assemblies and all of the previous assem-
blies that were left loosely fastened.
FULLY FASTEN
18
BRT-1 “The Brute” Plate Loaded Home Gym
