FIG. 32
Begin the routing of the
Leg Extension Cable (#32)
under the
Nylon Pulley 4 1/2 Rd. (#64-Labeled E), then up and through the opening
on the
Main Frame (#5).
Note:
Refer to the Cable Mapping Diagram on page 20 for further
detailed illustration of the
Leg Extension Cable (#32)
routing.
FIG. 33
Next, route the
Leg Extension Cable (#32)
up and over the Ny-
lon Pulley 4 1/2 Rd. (#64-Labeled F).
Note:
Refer to the Cable Mapping Diagram on page 20 for further
detailed illustration of the
Leg Extension Cable (#32)
routing.
FIG. 34
Route the
Leg Extension Cable (#32)
down passing through
the opening located on the
Main Frame (#5)
. Next, route the cable into
the opening on the
Base Frame (#1)
. Then, insert a Nylon Pulley 4 1/2
Rd. (#64-Labeled G) into the pulley bracket of the
Base Frame (#1)
and
secure it into place using one Hex Head Cap Screw 3/8-16 X 2 1/2 (#79),
two Flat Washers SAE 3/8” (#84), and one Nylon Insert Jam Lock Nut 3/8-
16 (#85).
Note:
Refer to the Cable Mapping Diagram on page 20 for further
detailed illustration of the
Leg Extension Cable (#32)
routing.
FIG. 35
Continue routing the
Leg Extension Cable (#32)
through the
tube of the
Base Frame (#1)
. Then, pull the Cable up through the open-
ing located at the top of the
Base Frame (#1)
. Using Long-Reach Nee-
dle-Nose Pliers may facilitate pulling out the cable.
Note:
Refer to the Cable Mapping Diagram on page 20 for further
detailed illustration of the
Leg Extension Cable (#32)
routing.
NOTE:
10
BRT-1 “The Brute” Plate Loaded Home Gym
NOTE:
NOTE:
NOTE:
Owner’s Manual: Assembly Instructions
Top View
