Owner’s Manual: Assembly Instructions
FIG. 8
Affix the two
Stabilizers (#4)
to the
Triangular Reinforcement
Plates (#2, #113)
and the
Base Frame (#1)
, in the position as shown
above, and secure them into place using two Hex Head Cap Screws 1/2-
13 X 4 (#71), four Flat Washers SAE 1/2” (#68), and two Nylon Insert Lock
Nuts 1/2-13 (#74).
FIG. 9
Secure the
Foot Support Tube (#3)
to the
Triangular Rein-
forcement Plates (#2, #113)
, and the two
Stabilizers (#4)
using four Hex
Head Cap Screws 3/8-16 X 2 3/4 (#80), eight Flat Washers SAE
3/8” (#84), and four Nylon Insert Jam Lock Nuts 3/8-16 (#85).
FIG. 10
Remove the backing of the two Safety Anti-Slip Tape 4 X 10
(#40) strips. Next, attach the two Safety Anti-Slip Tape 4 X 10 (#40) to the
Foot Support Tube (#3)
, in the position as shown above.
Note:
To facilitate the alignment of the strips across the
Foot sup-
port Tube (#3)
, use a measuring tape. The measurement from the
edge of the
Triangular Reinforcement Plate (#2
, or
#113)
to the
inner edge of the Safety Anti-Slip Tape (#40), as picture above,
should be about 3 3/8”
FIG. 11
Mount the
Base Frame Handles (#37)
to the
Base Frame (#1)
and secure them into place using one Hex Head Cap Screw 3/8-16 X 2
3/4 (#80), two Flat Washers SAE 3/8” (#84), and one Nylon Insert Jam
Lock Nut 3/8-16 (#85).
NOTE:
4
BRT-1 “The Brute” Plate Loaded Home Gym
3 3/8”