7
BRT-1 “The Brute” Plate Loaded Home Gym
FIG. 20
Using a rubber mallet, insert three Plastic Insert Caps 1 3/4” Sq.
(#57) into the tube-ends of the
Leg Extension Arm (#18)
. Next, attach
the Rubber Bumper 3/8 X 1 1/2 (#53) to the
Leg Extension Arm (#18)
us-
ing one Hex Head Cap Screw 3/8-16 X 1 1/4 (#76).
Note
: The
Adjustable Foot Roll Tubes (#20)
have been assem-
bled to the
Leg Extension Arm (#18)
.
FIG. 21
Affix the
Leg Extension Arm (#18)
, in the position as shown
above, to the
Base Frame (#1)
and secure it into place by inserting the
Leg Extension Axle 1/2 X 2 3/4 (#19)
through the
Base Frame (#1)
hole
and the
Leg Extension Arm (#18)
receptacle until it becomes flush with
both sides of the
Base Frame (#19)
.
FIG. 22
Secure the
Leg Extension Axle 1/2 X 2 3/4 (#19)
to the
Base
Frame (#1)
using two Set Screws 1/4-20 X 3/8 (#41). Use the supplied
Hex Key 1/8” (#93) to fasten these Set Screws.
FIG. 23
Attach the
Lat Bar Holder (#30)
, in the position as shown
above, to the
Main Frame (#5)
and secure it into place using one Hex
Head Cap Screw 3/8-16 X 2 3/4 (#80), two Flat Washers SAE 3/8” (#84),
and one Nylon Insert Jam Lock Nut 3/8-16 (#85).
NOTE:
