FIG. 28
Route the
Lat Cable (#31)
through the
Closed-end Adj. Dou-
ble Pulley Bracket (#33)
and under the Nylon Pulley 4 1/2 Rd. (#64-
Labeled C).
FIG. 29
Next, route the
Lat Cable (#31)
up into the
Adjustable Pulley
Bracket (#34)
. Then, insert a Nylon Pulley 4 1/2 Rd. (#64-Labeled D) into
the
Adjustable Pulley Bracket (#34)
and secure it into place using one
Hex Head Cap Screw 3/8-16 X 2 (#78), two Flat Washers SAE 3/8” (#84),
and one Nylon Insert Jam Lock Nut 3/8-16 (#85).
Loosely Fasten:
Do not completely fasten this hardware assembly
at this time, as it will be completely fastened later in the assembly
process.
Note:
Refer to the Cable Mapping Diagram on page 20 for further
detailed illustration of the
Lat Cable (#31)
routing.
9
BRT-1 “The Brute” Plate Loaded Home Gym
FIG. 30
Secure the looped end of the
Lat Cable (#31)
to the bracket of
the
Weight Carriage (#10)
using one Shoulder Bolt 3/8 X 3/4 (#86), and
one Nylon Insert Lock Nut 5/16-18 (#99).
FIG. 31
Next, slide a Rubber Bumper Washer (#101) onto each of the
weight prongs of the
Weight Carriage (#10)
.
Note:
To facilitate the insertion of these Rubber Bumper Washers
(#101), use Windex or household glass cleaner.
NOTE:
NOTE:
LOOSELY FASTEN
