2-4) Now that all of the resistors have been installed, we can move on to the MLCC oscillator C309 and C310 [2 x 15pF] and Microcontroller
power decoupling capacitors C307 and C308 [2 x 100nF]. Install them into the PCB and solder in place. None of these are polarised:
2-5) Next, prepare the oscillator crystal CLK_XTAL [20MHz], by installing the isolator onto the pins of the crystal and sliding it up against
the bottom of the crystal can:
2-6) Insert CLK_XTAL into the PCB as well as the 40-pin Microcontroller Socket into the PCB and solder in place.Once the 40 pin Socket
has been installed, pinch the decoupling capacitors together so that they will stay below the Socket so that the Microcontroller will sit
properly in the Socket.
DIY Build DOC/BOM
KOSMODROM CHAOS DIVIDER
V 1.4
Page 7
