4-3) Next, install Resettable Fuses PF101 and PF102 [2 x RXEF005] into the PCB and solder them in place:
4-4) Before installing the rest of the Control and I/O components in the WHITE Control PCB, we need to install the last of the pin headers
that connect the WHITE Control PCB to the BLUE Signal PCB. Install the remaining female pin headers FHDR_O9 [1x3], FHDR_O12,
FHDR_O34, FHDR_O56, FHDR_O78 [1x5], and FHDR_CONTROLS [1x10] onto the male pin headers MHDR_O9 [1x3], MHDR_O12,
MHDR_O34, MHDR_O56, MHDR_O78 [1x5], and MHDR_CONTROLS [1x10] on to the BLUE Signal PCB.
Place the WHITE Control PCB onto the BLUE Signal PCB, being sure to line up the holes in the WHITE Control PCB with the pins of the female
pin headers. Secure the PCBs together with three pairs of M3 x 6mm screws and three female/female stand-ofs. Solder the female pin
headers to the WHITE Control PCB and the male pin headers to the BLUE Signal PCB. Things will get crowded soon on the front of the WHITE
Control PCB, so if you clean your fux residue, this is a good time to do it:
DIY Build DOC/BOM
KOSMODROM CHAOS DIVIDER
V 1.4
Page 27
