Tsino Dynatron EtherCAT CoolDrive RC Series, User Manual

Page: 148 / 278

Tsino-Dynatron Electrical Technology (Beijing) Co., Ltd.
Parameter description: Set the characteristic of a servo drive from servo "OPERATION ENABLE" to
"READY TO SWITCH ON".
User permission: User/Engineer.
Parameter permission: Read and Write
Number Index Name Unit Setting range
Default
value
Effective
time
111 0x605C
Disable operation
option code
- 0x0000~0x0001 0x0001 Immediately
Byte0: Disable operation option code
0x00-Immediately stop the motor output, and the motor stops freely;
0x01-"Slope deceleration" decelerates to zero, and then blocks the PWM pulse.
Byte1: Reserved. The default value is 0
Parameter description: Set the characteristic of a servo controller from servo "OPERATION ENABLE" to
"SWITCH ON".
User permission: User/Engineer.
Parameter permission:
Read and Write
Motor Overload Parameter Setting 7.7.4
Number Index Name Unit Setting range
Default
value
Effective
time
85 0x20A6
Motor Overload
Warning Level
% 1~100 80 Immediately
Parameter description: This parameter is set to the percentage of the motor overload protection threshold.
When the motor load rate exceeds this threshold, the drive will report a motor overload warning.
User permission:
User/Engineer.
Parameter permission: Read and Write
Number Index Name Unit Setting range
Default
value
Effective
time
149 0x202D
Motor Fast
Overload Alarm
Level
% 100~500 200 Immediately
129