Tsino Dynatron EtherCAT CoolDrive RC Series, User Manual

Page: 146 / 278

Tsino-Dynatron Electrical Technology (Beijing) Co., Ltd.
Parameter permission: Read and Write
Number Index Name Unit Setting range
Default
value
Effective time
81 0x2094
Fault
Operation
Switch
— 0x00000000~0x01010101 0x01010100 Restart
Byte0: Fault reaction option code
0x00-"Can not reset fault" is cleared after re-power on;
0x01-"Can not reset fault " is cleared immediately;
Byte1: Detection switch for the output phase loss
0x00-Disable detection for the output phase loss
0x01-Enable detection for the output phase loss
Byte2: Drive external fault detection switch
0x00-Disable drive external fault detection;
0x01-Enable drive external fault detection.
Byte3: Detection switch for the output short circuit to ground
0x00-Disable detection for the output short circuit to ground
0x01-Enable detection for the output short circuit to ground
User permission: User/Engineer.
Parameter permission: Read and Write
Number Index Name Unit Setting range
Default
value
Effective
time
78 0x2090
Slow Ramp
Deceleration
inc/ms² 1~3000 30 Immediately
User permission: User/Engineer.
Parameter permission:
Read and Write
Number Index Name Unit Setting range
Default
value
Effective
time
79 0x2092
Active Stop
Delay Time
ms 100~10000 500 Immediately
127