16
Maintenance
E600EN_01.DOC
5.2 Replacing the TruTool C 160 (1B2)
Replacing the blade
Warning
Risk of injury due to uncontrolled machine movements.
¾
Remove the compressed-air hose when changing tools and
before performing any maintenance work on the machine.
Caution
Damage to property caused by blunt tools!
Machine overload.
¾
Check the cutting edge of the blade hourly for wear. Sharp
blades ensure good cutting quality and protect the machine.
Replace the blades in due time.
3
26
7
24
10
F
F
F
F
4
12
8
3 Cutting
head
4 Insertable
cutter
7
Handle, chip separator
8 Handle
10 Fixing screws M 4x8
12 Locking
washer
24 Blade bearing pin
26 Blade
F
Lubricating grease "G1"
(139440)
If the cutting edges are blunt, replace the blades.
1. Remove the locking washer (12) using a screwdriver.
2. Push out the bearing pins (24).
3. Pull the blade (26) out of the cutting head.
4. Apply a thin layer of grease to the bearing pin and the new
blade.
5. Insert the blade.
Fig. 17577
