E600EN_01.DOC
Setting
work
7
Noise emissions
Designations in accordance
with EN ISO 4871
Measured values in accordance
with EN ISO 15744
A-rated sound level L
WA
93
dB
A-rated acoustic power level at the
work place L
PA
82 dB
The noise emission values given are the sum of the measured
values and the corresponding uncertainties. They represent an
upper value limit which can emerge during measurements.
3. Setting
work
3.1 Installing the exhaust hose
The exhaust hose reduces noise emissions and guides the
exhaust air away from the operator.
1 Adapter
2 Teflon
tape
3 Screw
grommet
4 Compressed-air
hose
5 Hose
clip
6 Exhaust
hose
7 Spring
ring
Exhaust hose
1. Put the exhaust hose (6) and the hose clip (5) over the
compressed-air hose (4).
2. Undo the spring ring (7) and screw the adapter (1) onto the
motor.
3. Wind Teflon tape (2) around the screw grommet (3).
4. Tightly screw the grommet into the motor.
5. Push the compressed-air hose (4) on the grommet.
6. Position the hose clip (5) and tighten.
7. Push the exhaust hose (6) on to the adapter (1).
8. Secure the exhaust hose (6) using the spring ring (7).
Tab. 4
Fig. 52422
