E600EN_01.DOC
Original accessories and wearing parts
21
6.
Original accessories and wearing parts
Supplied
original
accessories
Wearing parts
Options
Order no.
Insertable cutters for TruTool C 160 (1A2)
(1 set = 2 pieces with screws)
+ +
927708
Insertable cutters for TruTool C 160 (1B2)
(1 set = 2 pieces with screws)
+ +
913520
Straight cutter 1-1.6 mm/0.040-0.063 in
+
+
143463
Straight cutter 1.0 mm/0.040 in
+
143432
Curve blade 1.0 mm/0.040 in
+
143434
Blade CR 1.2 mm/0.047 in
(for cutting high-tensile sheets)
+
934055
Chip separator
(only for TruTool C 160 (1B2))
+ +
143950
Allen key DIN 911-2.5
+
067822
Screw grommet
+
0376078
Fin set (4 pieces)
+
1440002
Operator's manual
+
1440911
Safety information (red document)
+
0373678
Parallel stop
+
143439
Lubricating grease "G1" (25 g/0.055 lbs)
+
344969
Lubricating grease "G1" (900 g/1.98 lbs)
+
139440
To ensure the correct and fast delivery of original parts and
wearing parts:
1. Specify the order number.
2. Enter further order data:
–
Voltage data.
–
Quantity
–
Machine type.
3. Provide complete shipping information:
–
Correct address
–
Desired delivery type (e.g. air mail, courier, express mail,
ordinary freight, parcel post).
4. Send the order to the TRUMPF representative office. For
TRUMPF service addresses, see the address list at the end of
the document.
Tab. 7
Ordering wearing parts
