E600EN_01.DOC
Maintenance
13
5. Maintenance
Warning
Risk of injury due to repair work not being carried out
properly!
Machine does not work properly.
¾
Repair work may only be carried out by a qualified technician.
Maintenance point
Procedure and interval
Recommended lubricant
Lubricant
order no.
Bearing pin
Lubricate when replacing the
blade
Lubricating grease "G1"
139440
Blade
Change as needed (see
"Replacing the blade", p. 14).
- -
Blade
Lubricate when replacing the
blade
Lubricating grease "G1"
139440
Gearbox and gear head
After 300 operating hours, arrange
for a qualified technician to relubri-
cate or to replace the lubricating
grease.
Lubricating grease "G1"
139440
Insertable cutters
Turn as needed (see "Turning or
replacing the insertable cutters",
p. 15).
- -
Insertable cutters
Change as needed (see "Turning
or replacing the insertable
cutters", p. 15).
- -
Filter, oil mist lubrication
device
Maintain daily in accordance with
the manufacturer's specifications
(see "Supplying with power and
guaranteeing lubrication", p. 18)
- -
Strainer
Clean every 10 operating hours
and when there has been a
decline in performance (see
"Cleaning the strainer", p. 20).
- -
Maintenance table
Tab. 6
