14
Maintenance
E600EN_01.DOC
5.1 Replacing the TruTool C 160 (1A2)
Replacing the blade
Warning
Risk of injury due to uncontrolled machine movements.
¾
Remove the compressed-air hose when changing tools and
before performing any maintenance work on the machine.
Caution
Damage to property caused by blunt tools!
Machine overload.
¾
Check the cutting edge of the blade hourly for wear. Sharp
blades ensure good cutting quality and protect the machine.
Replace the blades in due time.
3
26
4
24
10
F
F
F
F
3 Cutting
head
4 Insertable
cutter
10 Fixing
screw
24 Blade bearing pin
26 Blade
F
Lubricating grease "G1" (139440)
Replacing the tool
If the cutting edges are blunt, replace the blades.
1. Push out the bearing pin (24) which was locked into place.
2. Pull the blade (26) out of the cutting head (3).
3. Apply a thin layer of grease to the bearing pin and the new
blade.
4. Insert the blade.
5. Push the bearing bolt (24) into the bore hole until it locks into
place.
Fig. 17576
