manualshive.com logo in svg

Triumph Adler DP 773, Service Manual

Share
Download
Triumph Adler DP 773 Service Manual Download Page 71

3PH

1-4-2

9007

DP switchback jam 4

DP eject sensor (DPES) is not turned off within specified time 
since original switchback operation starts.

9008

No original feed jam 3

DP CIS sensor (DPCS) does not turn on within specified time 
of the paper feed starting.

9009

DP original conveying jam 2

Next feed original became the stand-by states of paper feed 
while reading the image.

9010

DP open

The DP is opened during original feeding.
Sensor in the conveying system is on when the power is 
turned on or the cover is closed.

9011

DP top cover open

The DP top cover is opened during original feeding.

9020

Original skew feed jam

DP skew sensor (DPSS) does not turn on within specified time 
of DP registration sensor (DPRS) turning on.

9110

DP paper feed sensor stay 
jam

The DP paper feed sensor (DPPFS) or DP registration sensor 
(DPRS) does not turn off within the specified time of the DP 
timing sensor (DPTS) turning on.

9200

DP registration sensor non 
arrival jam

The DP registration sensor (DPRS) does not turn on within the 
specified time of the DP paper feed sensor (DPPFS) turning 
on.

9210

DP registration sensor stay 
jam

DP registration sensor (DPRS) does not turn off within speci-
fied time of DP timing sensor (DPTS) turning on.

9300

DP CIS sensor non arrival jam DP CIS sensor (DPCS) does not turn on within specified time 

of DP registration sensor (DPFS) turning on.

9310

DP CIS sensor stay jam

DP CIS sensor (DPCS) does not turn off within specified time 
of DP registration sensor (DPFS) turning off.

9400

DP timing sensor non arrival 
jam

The DP timing sensor (DPTS) does not turn on within the 
specified time of the DP registration sensor (DPRS) turning on 
(Retry 5 times).

9410

DP timing sensor stay jam

The DP timing sensor (DPTS) does not turned off within the 
specified time its turning on.

9500

DP switchback sensor non 
arrival jam

DP switchback sensor (DPSBS) does not turn on within speci-
fied time of DP timing sensor (DPTS) turning on.

9600

DP eject sensor non arrival 
jam

DP eject sensor (DPES) does not turn on within specified time 
of DP timing sensor (DPTS) turning on.

9610

DP eject sensor stay jam

DP eject sensor (DPES) does not turn off within specified time 
of DP timing sensor (DPTS) turning off.

Code

Contents

Conditions

Summary of Contents for DP 773


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands