Triumph Adler DC 2025 Instruction Handbook Manual Download Page 95

Page: 95 / 139

CHAPTER 6 FUNCTIONS

6-21

Touch the [Close] key.
The display will return to the “Machine default” screen.

Touch the [Close] key.
The display will return to the “Default setting menu”
screen.

Inch specifications

Metric specifications

Touch the [Close] key.
The display will return to the “Machine default” screen.

Touch the [Close] key.
The display will return to the “Default setting menu”
screen.

•

Auto shut-off ON/OFF

Select whether you want the auto shut-off time function to be
turned ON or OFF.

Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)

Select “Auto shut-off” in the setting item list at the left-
hand side of the screen, and then touch the [Change #]
key.
The “Auto shut-off” screen will appear.

To use the Auto shut-off function, touch the [ON] key.

NOTE

• To cancel the settings, touch [Back] key. The display will return

to the “Machine default” screen.

Inch specifications

Metric specifications

Summary of Contents for DC 2025












































































































































Search results

Summary of Contents for DC 2025

Reviews:

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 95 / 139

Search results

Summary of Contents for DC 2025

Reviews: