manualshive.com logo in svg

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 17 / 139

Share
Download
Triumph Adler DC 2025 Instruction Handbook Manual Download Page 17

CHAPTER 2  NAMES OF PARTS

2-5

H

 [User choice] key

(Touch this key to display the User choice screen.)

I

 [Function] key

(Touch this key to display the Function screen.)

Inch specifications

Metric specifications

J

 [Program] key

(Touch this key to register the current settings as a single pro-
gram, or to delete a registered program.)

NOTE

When touching the key with the “

 

” mark at the lorwer-right cor-

ner, the setting screen will be displayed.

[Resister] key
(Touch this key to register the settings to a registration key.)
[Back] key
(Touch this key to return to the initial screen of the current
mode.)
[Close] key
(Touch this key to return to the previous screen.)

NOTE

• Displayed keys on the Basic, User choice screen can be changed

or added using Customize (Main function) on page 6-32 or Cus-
tomize (Add function) on page 6-33.

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Summary of Contents for DC 2025












































































































































Reviews:

No comments