manualshive.com logo in svg

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 89 / 139

Share
Download
Triumph Adler DC 2025 Instruction Handbook Manual Download Page 89

CHAPTER 6  FUNCTIONS

6-15

Select “APS for special paper” in the setting item list at
the left-hand side of the screen, and then touch the
[Change #] key.
The “APS for special paper” screen will appear.

To use the paper in the cassette set in the “Special pa-
per”, touch the [On] key.

NOTE

• To cancel the settings, touch [Back] key. The display will return

to the “Machine default” screen.

Touch the [Close] key.
The display will return to the “Machine default” screen.

Touch the [Close] key.
The display will return to the “Default setting menu”
screen.

•

 Paper size (1st cassette)

Select what paper size will be displayed on the touch panel for
1st cassette.

Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)

Select “Paper size (1st cassette)” in the setting item list
at the left-hand side of the screen, and then touch the
[Change #] key.
The “Paper size (1st cassette)” screen will appear.

Select the paper size as 1st cassette to be displayed on
the touch panel. To use the auto selection mode, touch
the [Auto] key.

NOTE

• To cancel the settings, touch [Back] key. The display will return

to the “Machine default” screen.

Touch the [Close] key.
The display will return to the “Machine default” screen.

Touch the [Close] key.
The display will return to the “Default setting menu”
screen.

•

 Paper size (2nd cassette)

Select what paper size will be displayed on the touch panel for
2nd cassette. (See “Paper size (1st cassette)”.)

2

3

4

5

1

2

3

4

5

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Summary of Contents for DC 2025












































































































































Reviews:

No comments