Triumph Adler DC 2025, Instruction Handbook Manual, Page: 86 / 139

CHAPTER 6 FUNCTIONS
6-12
Page
“Machine default”
settings
Content of machine default settings
Default settings
Setting range
Auto shut-off time
Auto preheat time
Select copy output
mode (optional)
Select FAX output mode
(optional)
Select the main mode
(optional)
Key sound ON/OFF
Silent mode
Management code
change
Auto shut-off ON/OFF
Selects the length of time that you want to elapse
when the copier is not used. The auto shut-off
function automatically turns the power to the
copier OFF. It is possible to set this time to any
15 minute increment between 15 and 240 min-
utes. It is also possible to deactivate the auto
shut-off function.
The factory default setting is 60 minutes.
*It is recommended that you extend the time
before the auto shut-off function engages if the
copier is used relatively frequently, and shorten
that time when it is used infrequently.
Select the length of time that you want to elapse
– after copying ends – before the energy-saving
auto preheat function is engaged. It is possible
to set this time to any 5 minute increment be-
tween 1 and 45 minutes.
Selects whether to eject copied paper to copier
or either the document finisher or job separator.
*This setting is not displayed when the copier is
not equipped with the optional document finisher
or job separator.
Selects where to eject facsimile paper: the in-
ner tray, job separator, document finisher or mail-
box.
*This setting is not displayed when the copier is
not equipped with the optional document finisher
or job separator.
Selects the initial screen displayed when the
power is turned ON.
Selects whether you want the “beep” that sounds
when you touch the touch panel to be turned
ON or OFF.
The copier can be switched to the silent mode,
which stops the motor inside the copy machine
immediately after copying has been finished.
When “ON” is selected, the motor stops imme-
diately after copying has been finished.
Changes the pin code that gives you access to
the various default settings and management.
*If you do change the management pin code,
however, be sure to keep a note of the new code.
If you do happen to forget the pin code, consult
your service representation.
Selects whether you want the auto shut-off time
function to be turned ON or OFF.
15 to 240 (min)
1 to 45 (min)
Inner tray, Job sepa-
rator, Document fin-
isher main tray,
Document finisher
sub tray
Inner tray, Job sepa-
rator, Document fin-
isher sub tray, Mail-
box 1
Copy mode, FAX
mode
ON/OFF
ON/OFF
0000 to 9999
ON/OFF
60 (min)
15 (min)
Inner tray
Inner tray
Copy mode
ON
OFF
2500 (For Copiers
with a copy speed of
25 copies per minute)
3500 (For Copiers
with a copy speed of
35 copies per minute)
ON
6-17
6-17
6-18
6-18
6-19
6-19
6-20
6-20
6-21