manualshive.com logo in svg

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 81 / 139

Share
Download
Triumph Adler DC 2025 Instruction Handbook Manual Download Page 81

CHAPTER 6  FUNCTIONS

6-7

Touch the [Close] key.
“Amend the number of copy” screen will appear.

Touch the [Close] key.
The “Management code menu” screen will appear.

Touch the [On] key below “Copy”, and then touch the
[Close] key.
The selected management code is turned ON, and then
the display will return to the “Default setting menu”
screen.

•

 Clearing copy counts

Clear all the copy counts for the various departments after a suit-
able period of time. Copy counts cannot be cleared individually.

Display the “Management code menu” screen. (See (2)
How to display the “Management code menu” screen.)

Touch the [Counter clear] key.
A message asking you to confirm the deletion of the copy

counts will appear.

To clear the codes, touch the [Yes] key. To cancel, touch
the [No] key.

The copy counts are cleared, and the control returns to
the “Management code menu” screen.

5

6

7

1

2

3

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Inch specifications

Metric specifications

4

Summary of Contents for DC 2025












































































































































Reviews:

No comments