Triumph Adler DC 2025, Instruction Handbook Manual, Page: 25 / 139

4-1
3. Function selection
Select from the copier’s various functions.
• Enlargement/reduction (see page 4-4)
• Interrupt copying (see page 4-7)
• Duplex copying from various originals (see page 5-1)
• Copying two-page originals as separate pages (see page
5-4)
• Making a margin space for binding (see page 5-6)
• Making copies with clean edges (see page 5-8)
• One copy from two or four originals (see page 5-10)
• Printing page numbers on the copies (see page 5-12)
• Overlaying images (see page 5-15)
• Making a booklet (sheet originals) (see page 5-16)
• Making a booklet (two-page [open-face] originals) (see
page 5-18)
• Sorting without document finisher (see page 5-20)
• Rotate copy (see page 5-21)
• Auto selection mode (see page 5-22)
• Adding covers for copies (see page 5-23)
• Feeding a paper as a backing sheet for transparencies
(see page 5-26)
• Inverting black and white (see page 5-28)
• Making mirror-image copies (see page 5-29)
• Copying large number of originals in one batch (see page
5-30)
1. Basic copying procedure
1. Warm-up
Turn the main switch ON ( | ). At the end of warm-up, “Ready to
copy.” will appear on the message display.
NOTE
• If originals are set and the Start key is pressed while the copier
is still warming up, copying will begin as soon as warm-up ends.
2. Setting originals
Set originals on the platen or in the Document Processor.
When setting the original on the platen, adjust it with the original
size scales based on the left rear position.
NOTE
• See page 7-1 for how to set originals in the Document Proces-
sor.
2
3
Metric specifications
3
Inch specifications
1
CHAPTER 4 BASIC OPERATION