manualshive.com logo in svg

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 104 / 139

Share
Download
Triumph Adler DC 2025 Instruction Handbook Manual Download Page 104

CHAPTER 6  FUNCTIONS

6-30

•

 Default margin width

Set the initial value of the margin width for the left margin in the
margin copy mode.

Display the “Copy default” screen. (See (2) Accessing
the copy default setting mode.)

Select “Default margin width” in the setting item list at
the left-hand side of the screen, and then touch the
[Change #] key.
The “Default margin width” screen will appear.

Touch the [+] key or [–] key to adjust left margin width.

NOTE

• To cancel the settings, touch [Back] key. The display will return

to the “Copy default” screen.

Touch the [Close] key.
The display will return to the “Copy default” screen.

Touch the [Close] key.
The display will return to the “Default setting menu”
screen.

1

2

3

4

5

Inch specifications

Metric specifications

Inch specifications

Metric specifications

•

 Manual exposure adjustment (Photo)

Adjust the overall exposure level for the “Photo” manual expo-
sure mode.

Display the “Copy default” screen. (See (2) Accessing
the copy default setting mode.)

Select “Manual exposure adjustment (Photo)” in the set-
ting item list at the left-hand side of the screen, and then
touch the [Change #] key.
The “Manual exposure adjustment (Photo)” screen will
appear.

Touch the [Lighter] or [Darker] key to adjust default set-
ting of copy exposure.

NOTE

• To cancel the settings, touch [Back] key. The display will return

to the “Copy default” screen.

Touch the [Close] key.
The display will return to the “Copy default” screen.

Touch the [Close] key.
The display will return to the “Default setting menu”
screen.

1

2

3

4

5

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Summary of Contents for DC 2025












































































































































Reviews:

No comments