manualshive.com logo in svg

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 39 / 139

Share
Download
Triumph Adler DC 2025 Instruction Handbook Manual Download Page 39

CHAPTER 5  FUNCTIONS

5-7

Touch the [Margin] key.
The front page margin set-up screen will appear.

Set the desired margin by touching the [

쑿

], [

쑼

], [

쑿

] or

[

씰

] key.

When making two-sided copies, touch the [Back page
margin] key.
The “Back page margin” screen will appear.

When setting a same margin for both the front and back
sides, touch the [Auto] key.
When the back-side margin is different from the front-
side margin, touch the [Front/Back margin] key.
The “Back page margin” screen will appear.

Set the desired margin by touching the  [

쑿

], [

쑼

], [

쑿

] or

[

씰

] key.

Check the orientation of originals according to the mes-
sage.

IMPORTANT

• If the orientation of the originals is incorrect, it may result in

wrong finished copies.

Copying will start when the [Start] key is pressed.

Inch specifications

Metric specifications

4

Inch specifications

Metric specifications

5

Inch specifications

Metric specifications

6

Inch specifications

Metric specifications

7

Inch specifications

Metric specifications

8

9

10

Summary of Contents for DC 2025












































































































































Reviews:

No comments