Triumph Adler DC 2025 Instruction Handbook Manual Download Page 54

Page: 54 / 139

CHAPTER 5 FUNCTIONS

5-22

12. Auto selection mode

When the optional Document Processor is used, if the paper size
is not selected with the Paper Select key the Document Proces-
sor automatically detects the size of every original. Copies are
then made onto paper of the same size as the originals.

IMPORTANT

• Up to 30 sheets of paper can be set in the Document Processor

in this mode.

(Inch specifications)

• Originals used in this mode are limited to 11"

17" and 8 1/2"

11"

or 8 1/2"

14" and 8 1/2"

11", and the width of all original

must be the same.

(Metric specifications)

• Originals used in this mode are limited to A3 and A4 or Folio

and A4R, and the width of all original must be the same.

Set originals in the Document Processor.

Touch the [Auto Selection] key.
The Auto Selection indicator will light.

Copying will start when the [Start] key is pressed.

(A3)

(Folio)

(A4)

11"

17"

8 1/2"

14"

11"

8 1/2"

(A4R)

8 1/2"

11"

Auto Selection

Summary of Contents for DC 2025












































































































































Search results

Summary of Contents for DC 2025

Reviews:

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 54 / 139

Search results

Summary of Contents for DC 2025

Reviews: