manualshive.com logo in svg

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 129 / 139

Share
Download
Triumph Adler DC 2025 Instruction Handbook Manual Download Page 129

CHAPTER 8  WHEN A PROBLEM OCCURS

8-9

If the misfed original is found, remove it.
* If paper is torn during removal, be sure to remove all

loose scraps from inside the copier, or they could cause
misfeed later.

Raise the reversing unit.

If the misfed original is found, remove it.
* If paper is torn during removal, be sure to remove all

loose scraps from inside the copier, or they could cause
misfeed later.

Turn the left knob to eject and remove the misfed origi-
nal.

Close the Document Processor original cover.

3

3

3

3

3

 Misfeed in Document Processor (optional) (JAM 70 to 73)

If the message below appears, a misfeed has occurred in the
Document Processor. Remove the misfed original using the pro-
cedure given below.

Open the Document Processor original cover.

Remove the misfed original.
* If paper is torn during removal, be sure to remove all

loose scraps from inside the copier, or they could cause
misfeed later.

Close the Document Processor original cover.

4

4

4

4

4

 Misfeed in built-in finisher (optional) (JAM 80 to 84)

If the message below appears, a misfeed has occurred in the
built-in finisher. Remove the misfed paper using the procedure
below.

3

2

Inch specifications

4

5

6

7

1

3

Inch specifications

Metric specifications

Summary of Contents for DC 2025












































































































































Reviews:

No comments