manualshive.com logo in svg

Triumph Adler DC 2025, Instruction Handbook Manual, Page: 37 / 139

Share
Download
Triumph Adler DC 2025 Instruction Handbook Manual Download Page 37

CHAPTER 5  FUNCTIONS

5-5

Press the [Start] key.
Scanning will start.

When originals are set in the Document Processor, copy-
ing will start after scanning the set originals.
When an original is set on the platen, a message for
scanning the next original appears. Go to the next step.

Replace the original and then press the [Start] key.
Scanning will start.

When all originals are scanned, touch the [Scanning fin-
ished] key. Copying will start.

Specify the type of the originals.
The original selection keys will appear.

Touch the [2 sided

➝

1 sided] or [Book

➝

1 sided] key ac-

cording to the type of the originals.

Specify the binding orientation of the originals.

Check the orientation of originals according to the mes-
sage.

IMPORTANT

• If the orientation of the originals is incorrect, it may result in

wrong finished copies.

4

8

7

5

6

Inch specifications

Metric specifications

2-sided originals

2-page (open-face) originals

2-sided originals

2-page (open-face) originals

9

10

Start

Stop/ 
Clear

Reset

2

3

4

5

6

7

8

9

0

→ →

Inch specifications

Metric specifications

2-sided originals

2-page (open-face) originals

2-sided originals

2-page (open-face) originals

Metric specifications

Inch specifications

Summary of Contents for DC 2025












































































































































Reviews:

No comments