Tridonic x/e-touchPANEL 02 Manual Download Page 11

Page: 11 / 118

Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en

Basic Settings

11 / 118

Select the Basic, Colour or Plug Application for the DALI operating modes or Emergency for controlling the
emergency lighting in the dropdown menu.

Confirm the selection with OK.
-> A dialog box is displayed indicating that a restart is essential depending on the Application selected.

Confirm the request with OK.
-> A restart of the x/e-touchPANEL is performed depending on the Application.

4.2.3. DALI Routing

Click on the "Main menu" symbol.
-> The "Main menu" is displayed

Click on the "Configuration" button
-> The "Configuration" page is displayed

Select the System tab.
-> The System tab is displayed

Allows to send commands from other controls (e.g. DALI XC, TOUCHPANEL 02) from DALI line A to line B and
vice versa.
This Function can be activated or deactivated.

NOTICE

DAP commands will be forwarded on address, group and Broadcast level.
Scene commands will only be forwarded on Broadcast level.

Summary of Contents for x/e-touchPANEL 02























































































































Search results

Summary of Contents for x/e-touchPANEL 02

Reviews:

Related manuals for x/e-touchPANEL 02

Brands by name

Popular brands

Tridonic x/e-touchPANEL 02, Manual

Search results

Summary of Contents for x/e-touchPANEL 02

Reviews:

Related manuals for x/e-touchPANEL 02

Brands by name

Popular brands