Tridonic x/e-touchPANEL 02 Manual Download Page 84

Page: 84 / 118

Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en

Operation in the Home menu

84 / 118

Button

Operating function

Opens the dialog box for selecting a lighting situation (sequence 1 to 99, schedule
1 to 7 or schedule list).

Shows the lighting situation that is called up using the Start/Pause, Stop and Off
buttons.

Displays the status.

Start:
Calls up the lighting situation and starts the time-controlled sequence.

Pause: Interrupts the lighting situation.

Stop: Ends the lighting situation (00:00:00).

Off: Switches off the lighting situation and ends the sequence.

Indicates that a time-controlled lighting situation is active. The button is displayed
in all menus and calls up the Scheduler in the Home menu.

Click on the Home button.

Click on the arrow keys until the Scheduler page is displayed.
-> The dialog box Load is displayed.

Click on the arrow keys until the desired lighting situation is displayed and confirm with OK.

Click on the Start button to call up the lighting situation.

Summary of Contents for x/e-touchPANEL 02























































































































Search results

Summary of Contents for x/e-touchPANEL 02

Reviews:

Related manuals for x/e-touchPANEL 02

Brands by name

Popular brands

Tridonic x/e-touchPANEL 02, Manual

Search results

Summary of Contents for x/e-touchPANEL 02

Reviews:

Related manuals for x/e-touchPANEL 02

Brands by name

Popular brands