Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en
Emergency Application
c
24 / 118
5.
6.
1.
2.
3.
4.
5.
-> Each emergency unit is displayed as part of a group.
Click on the Save symbol in order to save the grouping in the emergency units.
5.4.1. Changing the grouping
Based on an algorithm, the emergency units are assigned to six groups. Normally, the grouping does not have to be
changed. In special cases, such as e.g. the simultaneous testing of all emergency units of a room, the grouping can
be changed:
Click on the Main menu button.
Click on the Addressing/grouping button.
Select the addressing method "Grouping only, no search for devices"
The addresses of existing DALI devices remain unchanged.
->
Click on the "Next >" button.
When the message "Search completed" is displayed, click on the Complete button.
-> The Grouping page is displayed. Each emergency unit is displayed as part of a group.
I
NOTICE
The grouping of emergency units can only be changed after having performed the addressing method. Select the
addressing method Grouping only, no search for devices so that existing addresses are maintained.
