Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en
Basic Application
c
62 / 118
1.
2.
3.
4.
5.
The buttons are used to set the light colour when a DT8 device is used. If a group is
used for Tunable White components, an input field is also displayed in this group in
addition to a scroll bar. The colour temperature can be inserted in this input field
along the Planckian curve. If the value 0 is inserted, the colour temperature is set on
Mask.
If the Mask button is activated, the settings in this group are maintained, irrespective
of this scene.
If the Off button is activated, the group in the scene is switched off.
Use the Folder button to open the dialog box Load scene.
Use the Save button to open the dialog box Save scene. The group settings are
saved in the desired scene.
Use the green arrow key to switch to the next page.
Configuring scenes
One of the following settings are selected for each group in a scene:
One or several groups are defined.
Click on the "Main menu" symbol.
-> The "Main menu" is displayed
Click on the "Scenes (S)" button.
-> The page "S...:" is displayed.
Click on the Folder button to select the scene in which setting of the groups is to be saved.
-> The dialog box "Select scene" is displayed.
Use the arrow keys to select the scene (S1 to S16) and confirm with OK.
-> The scene is displayed.
Use the arrow keys of the scroll bar until the desired value is reached to set the dimming value for the first
group.
Dim
- or -
_
Off
- or -
_
Mask
_
I
NOTICE
To configure a scene, only one operating device is to be assigned to a group because otherwise conflicts may
occur.
