Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en
Basic Settings
c
13 / 118
4.
1.
2.
3.
4.
1.
2.
3.
Clean the touchscreen with a soft, damp cloth.
4.2.6. Setting the touchscreen
Set the user interface to your requirements in the Display tab.
Click on the "Main menu" symbol.
-> The "Main menu" is displayed
Click on the "Configuration" button
-> The "Configuration" page is displayed
-> The "Display" tab is displayed.
To activate a confirmation beep to be generated whenever buttons are clicked, activate the "Beep on touch"
check box.
Activate the "Screen saver" check box to switch on the screen saver. When the screen saver is activated, it is
displayed two minutes after the touchscreen has been touched last.
4.2.7. Password protection
Access can be limited to two levels by assigning a password.
Locking the configuration
Click on the "Main menu" symbol.
-> The "Main menu" is displayed
Click on the "Configuration" button
-> The "Configuration" page is displayed
-> The "Display" tab is displayed.
Activate the "Lock configuration" check box.
-> The password protection is set (factory default ›1234‹). A dialog box is displayed to change the password.
I
NOTICE
It is possible to load an application-specific screen saver (see "
").
Loading application-specific screen saver
Locking the configuration: The "Home" menu is freely accessible for operating the system. The configuration
of the buttons and the Main menu are password protected.
_
Locking the panel: The entire touchscreen is password protected
_
I
NOTICE
Ensure that you switch to the Home menu after locking the configuration. The password protection is only
effective at this point.
