TrickleStar TS2501, User Manual

Page: 98 / 113

98
You can perform configuration and resets on your Thermostat as follows:
Configuration and Reset
Type of Reset
1) HVAC System
Configuration
To reconfigure the
Thermostat for the
connected HVAC
system or change the
selection for
Start-Up Configuration.
2) System Reset
To reset your
Thermostat but maintain
the configuration,
Wi-Fi setup and
Thermostat settings as
well as your Portal
account.
3) Factory Reset
To reset your
Thermostat to factory
default settings, where
all user and device
settings will be deleted
and reset to factory
default settings.
4) Wi-Fi Network Reset
To reset your Wi-Fi
network for the
Thermostat when you
have changed to or
added a new network,
where all previous Wi-Fi
connection data will be
cleared.
Method
• Press and hold the Side button for 10 seconds.
OR
• At the Portal, select: Devices -> Device Name ->
Settings -> HVAC Configuration Items -> Configure
and Test
• Use a paper clip to press the System Reset
Pinhole at the bottom of your Thermostat.
• Press and hold the Jog dial and Side button
simultaneously for 15 seconds until “01” is shown
and “AP” flashes on the LCD display.
• At the Portal, select “Devices”, tick on the check
box beside the Device Name, then click “Delete”.
Click "Add New +" to add your Thermostat.
• Use a paper clip to press the System Reset
Pinhole at the bottom of your Thermostat. Then,
press and hold the jog dial throughout the start-up
screens displaying firmware versions until “01” is
shown and “AP” flashes on the LCD display.
• At the Portal, select: Devices -> Device Name ->
Settings -> Info and Time Zone -> Connected
Network (SSID) -> Configure
Page
N/A
12
94
96