22
Schedule Settings and Schedule Hold
Set a schedule (Schedule Setting)
If your Thermostat is connected to the TrickleStar Portal, you can create a daily/weekly schedule by
changing the Mode profiles.
Refer to “Scheduling the Device” on page
for details on configuring the Schedule via the
TrickleStar App.
Your Thermostat will automatically follow the Setpoint Temperature and Set Fan for both Heat and
Cool as per the Mode profiles in the schedule you have created.
Override a schedule (Schedule Hold)
You can override a Schedule Setting if necessary. The schedule will then be put on Hold.
There are three types of Hold:
• Temporary Hold: The setting will be used until the next schedule starts, or when you cancel
the Temporary Hold. It is activated when you change the Fan, Mode or Setpoint
Temperature manually.
• Permanent Hold: The setting is permanent until you cancel the Permanent Hold. You have to
manually enable the Permanent Hold via Portal/App after changing the Fan,
Mode or Setpoint Temperature.
• Vacation Hold: The setting is used until the preset end date and time is satisfied, or when you
cancel the Vacation Hold.
Note:
• To cancel the Temporary Hold, Permanent Hold or Vacation Hold, press and hold the Jog dial for 3
seconds. The Thermostat will return to current Schedule.
• You can also cancel the Temporary Hold, Permanent Hold or Vacation Hold in the Portal or the
App.
• You can only activate the Permanent Hold and Vacation Hold via the Portal or the App.
Summary of Contents for TS2501
