49
HVAC Settings
Supplemental Heating
Compressor Lock Out in
AUX Heating
Auto Season Changeover
Auto Season Changeover
Delay
Auto Season Changeover
Tolerance Range
If your HVAC system is a Heat Pump
(HP), select whether your Heat Pump
has supplemental electric resistance
and/or emergency heating. Available
for Single Stage Heating only.
Enable/disable the automatic shut
off for compressor stages when the
Auxiliary Heating is activated.
Enable/disable the Auto system
mode. The Auto Season Changeover
feature will automatically change the
System from Heating to Cooling or
from Cooling to Heating depending on
the room temperature. The thermostat
will keep the current system (both
heating and cooling will be turned
off) when the room temperature falls
between Set Temperature (Cool) and
Set Temperature (Heat) in the Modes
settings.
Select the minimum delay duration
between changing System Modes
(Heating to Cooling, or vice versa)
while in Auto system mode.
Select the temperature deadband to
trigger the Auto Season Changeover
feature. The system will automatically
change to Cooling/Heating mode if
the room temperature is higher/lower
than Setpoint Temperature by the
value of this setting.
When the Thermostat
is Online and if your
HVAC system is a Heat
Pump (HP) with Single
Stage Heating.
When the Thermostat
is Online.
When the Thermostat
is Online.
When the Thermostat
is Online.
When the Thermostat
is Online.
Summary of Contents for TS2501
