Chapter 4: Using the Command Line Interface
TR0190 Rev. B1
24
4.5.3
‘help’ command
Syntax
help [command|parameter]
where the optional argument is either one of the CLI commands
(“[command]”) or a parameter in the currently selected interface
(“[parameter]”).
Description
When no argument follows the help command, a help menu showing a list
of available commands is displayed. When a command is supplied as the
argument, a help message for that particular command is displayed. When
a parameter in the current interface is specified as the argument, help
information for it is displayed.
Example
help get
will display the help information for the ‘get’ command. With the ‘sys’
interface selected
sys>
help scheme
displays help information about that ‘scheme’ parameter, as shown below
scheme : wireless node type
4.5.4
‘show’ command
Syntax
show
Description
Displays all available interfaces. An interface in this list can be selected
with the ‘use’ command.
Summary of Contents for EL-500
Page 20: ...Chapter 3 Using the Web Interface TR0190 Rev B1 20 Figure 8 Rebooting the EL 500...
Page 68: ...Chapter 11 Ethernet Interface Configuration TR0190 Rev B1 68 Figure 38 Wired DHCP settings...
Page 108: ...Chapter 16 Controlling Access to the ER 1000 TR0190 Rev B1 108 Figure 50 VAP ACL configuration...
