Chapter 6: Status Information
TR0190 Rev. B1
34
6
Status Information
Multiple web interface pages that display status information about the EL-500 and client
devices attached to it are available. These web pages are accessible by clicking on the
“Status” link in the navigation bar and then selecting the appropriate tab shown at the top of
the page.
The status information is not accessible through the CLI.
6.1
Configuration Overview Page
The main status page, which is displayed when clicking on “Status” in the navigation bar and
when logging in, is the “Config Overview” page.
Figure 10. Partial configuration overview page
The configuration overview page shows a summary of settings for the virtual access point
interfaces and the wired interface. The firmware version, uptime of the device, and its
operating mode are also displayed.
Links labeled “(change)” are shown next to the settable parameters. These links take you to
the appropriate page to change the setting.
Summary of Contents for EL-500
Page 20: ...Chapter 3 Using the Web Interface TR0190 Rev B1 20 Figure 8 Rebooting the EL 500...
Page 68: ...Chapter 11 Ethernet Interface Configuration TR0190 Rev B1 68 Figure 38 Wired DHCP settings...
Page 108: ...Chapter 16 Controlling Access to the ER 1000 TR0190 Rev B1 108 Figure 50 VAP ACL configuration...
