Chapter 3: Using the Web Interface
TR0190 Rev. B1
19
click on the “Save Changes” button. It typically takes a few seconds to save the changes, after
which the page will be reloaded.
For the changes to take effect, the EL-500 must be rebooted. After a change has been
committed, a message reminding the user to reboot the EL-500 will be displayed at the top of
the screen.
Figure 7. Page showing "Save Changes" button and message prompting the user to reboot
3.4
Help Information
Help information is provided on most web GUI pages. The help information is shown on the
right-hand side of the page. The help information can be hidden by clicking on the ‘Hide Help’
link inside the help frame. When help is hidden, it can be displayed by clicking on the ‘Show
help’ link.
3.5
Rebooting
Click on the “Reboot” link on the left of the page and then click on the “Reboot Now” button to
reboot the EL-500. Any changes made prior to rebooting will take effect following completion of
the boot process.
It takes approximately 3 minutes for the device to reboot.
Summary of Contents for EL-500
Page 20: ...Chapter 3 Using the Web Interface TR0190 Rev B1 20 Figure 8 Rebooting the EL 500...
Page 68: ...Chapter 11 Ethernet Interface Configuration TR0190 Rev B1 68 Figure 38 Wired DHCP settings...
Page 108: ...Chapter 16 Controlling Access to the ER 1000 TR0190 Rev B1 108 Figure 50 VAP ACL configuration...
