Chapter 2: Connecting to the ER-1000
TR0190 Rev. B1
15
If you are configuring multiple EL-500s with the same computer in rapid succession,
it may be necessary to clear the ARP cache since the IP addresses for the EL-500s
will all be the same, but the MAC addresses will vary. The following commands can
be used to clear the ARP cache
Windows XP (executed in a command prompt window)
arp -d *
to clear the entire cache, or
arp -d 169.254.253.253
to just clear the EL-500 entry
Linux
arp -d 169.254.253.253
2.3
Default Login and Password
The EL-500’s default login is ‘
admin
’ and the default password is ‘
default
’. The login and
password are the same for the web interface and the CLI. Changing the password using one of
the interfaces will change it for the other interface as well.
2.4
Resetting the ‘admin’ Password
The EL-500 supports a password recovery feature for the ‘admin’ account, should the
password be lost.
Completing the password recovery procedure requires that you contact
Tranzeo
technical
support.
Please
check
the
Tranzeo
website
(www.tranzeo.com) for how to contact technical support and hours of
operation.
For security purposes, the ‘admin’ password can only be reset in the first 15
minutes of operation of the device. You will be able to power the unit on and
off to be able to reset the password.
Summary of Contents for EL-500
Page 20: ...Chapter 3 Using the Web Interface TR0190 Rev B1 20 Figure 8 Rebooting the EL 500...
Page 68: ...Chapter 11 Ethernet Interface Configuration TR0190 Rev B1 68 Figure 38 Wired DHCP settings...
Page 108: ...Chapter 16 Controlling Access to the ER 1000 TR0190 Rev B1 108 Figure 50 VAP ACL configuration...
