Chapter 20: Diagnostics Tools
TR0190 Rev. B1
133
20.5 RADIUS Server Testing
The “RADIUS” tab on the “Diagnostics” page can be used to test authentication of credentials
by a RADIUS servers used for splash page or WPA authentication (see Figure 66). Use the
procedure below to test the validity of credentials with a RADIUS server.
1. Select the RADIUS server you want to use for the test from the drop-down menu
2. Enter the credentials you want to test in the “Username” and “Password” fields
3. Click on the “Test User” button
The results of the test will be displayed at the bottom of the page. Three outcomes are
possible:
•
The credentials were authenticated by the server
•
Communication was established with the server, but the credentials were not valid
•
It was not possible to establish communication with the server
Figure 66. Testing credentials with a RADIUS server
20.6 Diagnostic Dump
The “Diagnostic Dump” tab on the “Diagnostics” page allows the user to create a snapshot of
diagnostic data that can be downloaded to a PC and sent to Tranzeo technical support for
analysis (see Figure 67).
Summary of Contents for EL-500
Page 20: ...Chapter 3 Using the Web Interface TR0190 Rev B1 20 Figure 8 Rebooting the EL 500...
Page 68: ...Chapter 11 Ethernet Interface Configuration TR0190 Rev B1 68 Figure 38 Wired DHCP settings...
Page 108: ...Chapter 16 Controlling Access to the ER 1000 TR0190 Rev B1 108 Figure 50 VAP ACL configuration...
