Transtech Transputer, User Manual

Page: 45 / 200

The TMB03 Motherboard
TMB M 711 Transputer Motherboard User Manual
37
4.1.1 Control Configuration
The board’s control configuration jumpers, IBM/UP and Mod0SS,
allow the source of control for the module in slot 0 and the modules
in slots 1, 2, 3 & 4 to be determined. The control consist of the TRAM
signals reset, error and analyse.
4.1.2 Board IO Address
Configuration of the board IO base address is achieved via jumpers
AS0, AS1, as follows:
Jumper in/out Description
IBM/UP out Slot 0 is controlled by the PC (default)
in Slot 0 is controlled by the edge
connector up port
Table 3: Slot 0 control selection
Jumper in/out Description
Mod0SS out Slots 1 to 4 are controlled from the Slot
0’s subsystem port
in Slots 1 to 4 are controlled from the same
source as Slot 0 (default)
Table 4: Slots 1 to 9 control selection
AS0 AS1 Description
in in Base address 150 hex (default)
in out Base address 200 hex
out in Base address 300 hex
Table 5: Base address select jumper