Network Configuration
140
Transputer Motherboard User Manual
TMB M 711
In this application the C004 is used simply as a crossbar switch. The
device is connected to 30 links, and can switch any link connected to
any other link connected.
The links connected to the C004 are:
•
link0 of all TRAM slots except module0 (module0 link0 is always
connected to the host PC),
•
link3 of all TRAM slots,
•
link 0 of the T2 configuration processor,
•
eight edge connectors,
•
two spare links, which are taken to the patch area.
The C004 is programmed via the T2 configuration processor on the
board. This in turn is programmed via
ConfigUp
.
The connections are shown in figure 96 for reference.
Summary of Contents for Transputer
