Transtech Transputer, User Manual

Page: 128 / 200

Network Configuration
120
Transputer Motherboard User Manual TMB M 711
When the TMB16 is configured as a master board, the T2’s
configuration link (link1) is taken to PipeHead (module0 link1). The
patch links (from the edge connector) are wired to the spare C004
positions.
When the TMB16 is configured as a slave board, the T2’s
configuration link is taken to the edge connector (patch0) and would
normally be connected to ConfigUp. Also, the board’s PipeHead
(module0 link1) is taken to the edge connector at patch1.
9.2.3 Summary of Network Configuration
Figure 83 shows the interconnection between the module slots, the
electronic link switch, the link patch area and the edge connector. It
is included for reference.
slot
0
slot
1
slot
2
slot
9
L0 L3 L0 L3 L0 L3 L3
L2 L1 L2 L1
L2L1 L2L1
T2
L0
L1
L1
L1
L2
L3
C004
Edge connector
PC link
ConfigUp
Figure 83. Network configuration summary
patch0/1 ConfigDown edge0 to 7 PipeTail
C004 L28/29