Tranax Mini-Bank 1500 Operator'S Manual Download Page 61

Page: 61 / 102

Section 4: Operation

Operator Manual

Doc. No. 101205

4.18

LAST X PRINT

The Last X Print option allows you to bypass the marker set when printing a journal

and go back to recover an older record (so long as the record still exists in memory).

For example, you print a journal and it includes sequence numbers <0001> to

<0100>. If you wanted to go back and reprint journal number <0080> you would

need to do a Last X Print for 20 records (100-20=80) this would give you records

100-80. To do a Last X Print, press the button and then enter a value of how many

records you wish to go back.

CLEAR TRANSACTION SEQUENCE NUMBER

This function will reset the journal sequence number back to <0000>. This may be

useful if you switch processing or switch Terminal ID numbers and want to keep new

records.

VIEW JOURNAL

View Journal allows you to visually

inspect the journal records. Press

the View Journal button and you

will see the screen to the left.

Use the Arrow keys on the main

keypad to scroll through the

records. You can also use the

buttons next to +50 and -50 to go

forward or backwards 50 records

at a time. Use the Enter button to

print the journal entry currently

displayed. Press Cancel to exit this

menu.

CLEAR JOURNAL

Clear Journal sets the current journal marker to the most recent journal recorded. It

does not delete the journal from memory. For example: You currently have 100

entries in your journal, you press Clear Journal. Now if you press Print Journal,

nothing will happen because there are no current journal entries, however if you

used Last X Journal, you could enter 100 and get all the records.

Summary of Contents for Mini-Bank 1500







































































































Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands

Tranax Mini-Bank 1500, Operator'S Manual

Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands