Tranax Mini-Bank 1500 Operator'S Manual Download Page 10

Page: 10 / 102

Introduction

Operator Manual

Doc. No. 101205

1.7

1.3 WARRANTY/SERVICE

MANUFACTURERS WARRANTY

Tranax Technologies, Inc. provides a limited one-year parts warranty and a limited

30 day labor warranty for the MiniBank series ATM. Tranax guarantees your

MiniBank ATM to be free from defects in materials and workmanship.

The one-year parts warranty and 30-day labor warranty periods will begin 15 days

from the shipping date.

WHAT IS COVERED:

· Cash Dispensing Unit (CDU) and Cash Cassette

· Receipt printer (SHU)

· LCD module

· Magnetic Card Reader (MCR)

· EPP Keypad

· Power Supply

· Mainboard (CE)

· Lock and locking mechanism **LIMITED 90 DAY WARRANTY**

Dial and Electronic locks will be covered by a limited 90-day warranty provided

the warranty registration card is completed and returned to Tranax within 10

days of installation. Should the lock fail under normal use, Tranax will replace

the lock only. Services required to open the vault and or replace the lock are at

the expense of the ATM owner.

WHAT IS NOT COVERED:

· Power cable and modem cable

· Key lock and key

· Plastic Bezels

· Software upgrade

· Receipt printer jam

· Note jam

· Forgotten password or combination of lock

· Any damages from misuse, improper installation, and vandalism

· Any damages from “brown out” or low power, lightning, or any other acts of God

Your distributor/dealer may offer an enhanced or extended warranty in addition to

the original manufacturers one-year warranty. Once the manufacturers warranty

has expired, all claims for warranty service must be resolved directly between the

distributor/dealer and the ATM owner. Tranax will only honor the extended warranty

of a MiniBank ATM that is registered in the Tranax Extended Part Replacement (EPR)

warranty program.

OBTAINING SERVICE:

If you have any problems or questions about your Tranax

ATM, your dealer or distributor is your primary contact for assistance/service. Your

manufacturers warranty is provided through your dealer or distributor.

Summary of Contents for Mini-Bank 1500







































































































Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands

Tranax Mini-Bank 1500, Operator'S Manual

Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands