Tranax Mini-Bank 1500 Operator'S Manual Download Page 30

Page: 30 / 102

Section 3: Programming

Operator Manual

Doc. No. 101205

3.17

3.3.6 MODEM SETUP

The MiniBank 1500 series use an onboard 56K modem. The modem is preset at the

factory for optimal use. Changing these settings can cause your machine to not

communicate or may slow communication speeds. Do not make changes to the

modem settings.

DIAL MODE

This selects between tone dialing and pulse dialing. (tone dialing recommended)

DTMF = Tone dialing

PULSE = Pulse dialing

MODEM SPEED

This sets the speed at which the modem will begin communication with the host.

The default speed is 2400. Most processors are only using 2400 baud modems, so

setting this value higher may not increase modem performance.

Available settings : 300, 1200, 2400, 4800, 9600, 19200, 38400, 56000

SPEAKER OUT

This will allow the modem to output its dial-out and handshaking through the

external speaker. This is useful when testing the modem to hear if it’s dialing

properly.

Available setting: OFF , ON

INITIAL STRING

This is the command line that the modem uses to communicate. This should not be

changed from factory default. Changing the modem string can cause

communications problems.

Factory Init String for Mini-Bank 1500™ = AT&F&Q6+MS=V22B

Summary of Contents for Mini-Bank 1500







































































































Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands

Tranax Mini-Bank 1500, Operator'S Manual

Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands