Tranax Mini-Bank 1500 Operator'S Manual Download Page 38

Page: 38 / 102

Section 3: Programming

Operator Manual

Doc. No. 101205

3.25

3.4.6 ADVERTISEMENTS

The Mini-Bank 1500™ is capable of displaying up to 7 graphic screen advertisements.

These ads are created on a computer and then downloaded into the ATM either

directly at the ATM using a laptop and a special download cable (available from your

dealer) or through the phone line using the Remote Management Software (RMS).

When the advertisements are injected and enabled they will rotate in order while the

ATM is waiting for a transaction and also while the transaction is processing. There

is a timer, which allows you to set a delay before switching to the next graphic

screen. Please see Appendix D at the end of this manual for detailed instructions for

creating advertisements.

RECEIPT COUPONS

The ATM can print up to 4 coupons

as a trailer to each transaction

receipt. Each coupon can be up to

2 lines of text, 25 characters per

line. Each coupon is surrounded

by a border at the end of the

receipt and looks like the

following.

Above each coupon will also print

the date and time, the Terminal

ID, a Journal Sequence number

and unique reference number

made up of the date and sequence

number.

The purpose of this is to allow tracking and authenticity of coupons if a value is

attached to them.

Step 1

To create a receipt coupon go to Customer

Setup Menu, then Advertisement.

Summary of Contents for Mini-Bank 1500







































































































Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands

Tranax Mini-Bank 1500, Operator'S Manual

Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands