Tranax Mini-Bank 1500 Operator'S Manual Download Page 101

Page: 101 / 102

Appendix D: Advertisement Graphics

Operator Manual

Doc. No. 101205

D.8

Step 3: Loading the graphic to the ATM

Once the graphic has been created and converted, it’s ready to be uploaded
to the ATM. To do this you have two options.

RMS Pro

RMS Professional will allow you to upload graphics via a phone

connection directly to the ATM, you can also enable/disable
them remotely using this program.

Cable

Using a PC or Laptop and a Tranax AP download cable you can
download the graphics at the ATM site. Part number TCY00002

RMS

Use the following procedure to upload a graphic using RMS Professional

Enter the ATM information into RMS per the RMS instruction manual
and request a “Setup”.

Highlight the ATM you’ll be sending the graphic to in the main window
in RMS.

Choose [Send] from the menu at the top of the RMS window.

The [Send] command has three options,

- [Application File Download *.bin]

- [Advertise File Download *.pcx]

- [Setup Report]

Choose [Advertise File Download *.pcx] and click [Config]

Browse to the folder where you extracted the M_PCX1.PCX file.

(this would be the Converted_Graphics folder on your desktop)

Select the file and click [Open]

At this point you’ll have the option to name the image (for reference
only) you do not have to enter anything.

Click [OK] and you’ll then be given the choice to create a receipt
coupon to accompany this advertisement. If you do not want a
coupon, leave it blank.

10) Click [OK] again and you’ll be notified that RMS is about to send the

graphic. Click [OK] to confirm.

11) RMS should now dial out to the ATM and upload the graphic. (this

takes 1-3 min)

12) Next, to enable the graphic that was just sent go back and follow steps

3, 4 and 5 again except this time choose [Setup Report]

13) When the Setup Report opens, click on the [AD TITLE – COUPON] tab

and set [m_pcx1:] to Enable.

14) Click [SEND] at the bottom of the report and you’ll be prompted to

confirm before the report will be sent.

15) Once the report has been successfully uploaded the graphic should

start displaying on its own.

Summary of Contents for Mini-Bank 1500







































































































Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands

Tranax Mini-Bank 1500, Operator'S Manual

Search results

Summary of Contents for Mini-Bank 1500

Reviews:

Related manuals for Mini-Bank 1500

Brands by name

Popular brands