Traktor Kontrol S8 User Manual Download Page 183

Page: 183 / 264

You can configure the Browse encoder to open the Browser on touch. To do so, activate the

Auto Open Browser on Touch

option in TRAKTOR's

Traktor Kontrol S8

Preferences.

4.2.7.7 BACK Button

►

Press the

BACK

button to navigate a level up in the folder structure, up to the Browser's

top level.

►

In order to exit the Browser, press the

BACK

button for longer than a second. Alternative-

ly, press the View button in the top right.

4.2.8

Performance Controls

Underneath the display, each Deck features four encoders and buttons which control either

FILTER

PITCH

FX SEND

per Slot in a Remix Deck, depending on the selected Performance mode.

Performance Controls

(1) Performance Controls on the left side control Remix Deck C's Slot effects.

Hardware Reference

The Deck

TRAKTOR KONTROL S8 - Manual - 183

Summary of Contents for Kontrol S8









































































































































































































































































Search results

Summary of Contents for Kontrol S8

Reviews:

Related manuals for Kontrol S8

Brands by name

Popular brands

Traktor Kontrol S8, User Manual

Search results

Summary of Contents for Kontrol S8

Reviews:

Related manuals for Kontrol S8

Brands by name

Popular brands