Connection Monitor Section
This section provides USB connection information:
Number of Clients
: Displays the number of clients connected to the interface. Multiple ASIO
applications are counted separately, WDM and WASAPI increase the number by one, no matter
how many WDM/WASAPI applications play audio.
USB Data Errors
: Counts USB data errors. Poor quality or too long cables, as well as interfer-
ence, can be the source of data errors on the USB bus.
Reset
: A click on this button resets the error count.
System Performance Test Section
This section provides real-time measurements of the latency introduced by Windows itself.
This data can give clues about the sources of bad performance.
Current Latency
: Displays the real-time value for Windows' internal latency. Monitor this value
as you launch and quit applications and connect or disconnect USB devices.
Maximum Latency
: Display the maximum value since the last reset. Comparing the difference
between Maximum and Current Latency can help find the sources of sudden CPU peaks.
Reset
: Resets the Maximum Latency value.
Stop
: Pauses the measurement process. Click again to continue measurement.
Information Section
Information:
Provides information about whether or not your driver and firmware are up to date.
Driver Version
: See the currently installed driver version here.
Firmware Version
: See the currently installed firmware version here.
Troubleshooting Guide
: Click
Show
to open the Troubleshooting Guide.
The S8 Audio Interface and Control Panel
Settings on Windows: The Control Panel
TRAKTOR KONTROL S8 - Manual - 254
Summary of Contents for Kontrol S8
Page 1: ...Manual...
